Bem Wireless 1725 Kilkenny Court Woodstock, IL 60098 TEL: 855-839-8616 This manual was converted into an accessible format by A T Guys. While we strive to present an accurate version of the manual, errors may occur. Please visit http://www.atguys.com for the latest product information. Getting Familiar with Bluetooth Speaker Wristband Hold the speaker in your hand, so that you feel a group of three buttons toward you and the speaker on top. The three buttons, in sequence from left to right, move backward a track/decrease the volume, pause music and move forward a track/increase the volume. They can also perform other functions as described later in this user guide. You can also use Speaker Wristband with some of the functions of BlindSquare, the popular navigation app for the iPhone, such as using the back/volume down button to have VoiceOver speak your current location. This is the same thing as shaking the phone while the app is in the foreground. On the left side of Bluetooth Speaker Wristband you will find the small power button. Pressing and holding this for a couple seconds will power it on, and an auditory announcement is made as well as a small LED light in the top left corner to visually confirm. Pressing and briefly holding the button a second time will attempt to pair Speaker Wristband with an available bluetooth connection. Finally, doing the same thing a third time will power off the device. Moving toward the back of the speaker you'll find the micro USB port, which can be used to charge the unit with the included micro USB cable. Getting Started Pairing with your mobile phone • Turn on the Speaker Band by pressing and holding the power button - LED with lights up with a tone Hold the "Power & Pair” button for 3 seconds "pairing mode”, the LED will flash fast "pairing mode”. • Activate Bluetooth on your mobile phone "Speaker Band". After paired for the first time, the Speaker and your mobile phone automatically pair. To Turn off the Speaker Band hold the for 3 seconds to enter “pairing mode”, with a tone "power off”. Wear the Speaker Band Wear the Speaker Band like a watch. Tips: Please do not expose your Speaker Band to temperature, such as an oven. ) the Speaker Band Make call Call will automatically transfer to the speakerphone. If not, tap Answer/ end button Answer call Tap answer/end button to answer the incoming call End call Tap answer/end button during the call to end the call Reject call Hold answer/end button to reject the incoming call Re-dial last number Hold answer/end button to redial last number when it is not in a call Play / pause Tap answer/end button to play and pause the music play Voice Commands* Double tap answer/end button to activate the voice command in your mobile phone Volume down / up Hold less-than or greater-than button Play control Press less than to the last track , press greater than to the next track Caller number When there is an incoming call, it will speak out the caller’s number Charging the Speaker Band The power LED will flash when the battery is low. Use the supplied USB cable to charge Speaker Band. Connect the power source and Speaker Band with the micro USB charging cable, the power LED will become solid. That indicates that the device is charging. The Power LED will turn off when it is fully charged. Trouble Shooting No connection: • Make sure the Bluetooth connection of your mobile phone is on • Make sure the speaker is on • Tap the answer/end button to wake up the Speaker Band • Pair the speaker again MaintenanceThe of the Case: First unplug the power cable. To remove dirt or De the casing with a soft, dry, lint-free cloth. To remove dirt or stains, moisten a soft cloth with water and a letergent and then wipe the casing. Do not use alcohol, benzene, thinners or other chemicals as these can cause the casing to be warped or damaged. Wipe off the Speaker Band when you are finish using it. If it will not be used for an extended period, be sure to follow these guidelines: Do not store the unit in a damp environment. Avoid exposing the unit to very high or low temperatures. Avoid prolonged exposure to direct sunlight, and charge it before you use it again. More Info For questions, comments or to purchase more Bem products go to: bemwireless.com You can also follow us at: facebook.com/bemwireless twitter.com/bemwirelessco youtube.com/bemwireless For information on your product’s warranty go to: bemwireless.com/support FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party for compliance could void the user's warranty. Technical Specifications Note: All specifications are subject to change without notice. Product Name : Speaker Band Model Number :HL2331 Power Supply: USB 5V, 500mA Working Temperature: 0°C-40°C Working Humidity: 20%-90%RH Safety Instructions This product is specially designed based on the full attention to safety; in order to make sure accident-free operation, please abide the guidelines listed below: • Always position the unit on a stable and level surface. Unstable can cause the unit to topple and fall, resulting in possible damage • Do not drop, unpack, open, beat, curve, prink and burn the unit • Avoid using the unit nearby basins or sinks where it may come in contact with water • Do not place anyware with full water on the top of the unit, use glass, pot, and please avoid placing candle on the speaker surface • Protect the using of the unit from any overheating devices (sucl radiator, heating installation, cooking stove or other heating device, • Regardless of what reasons cause the unit damage, please ask of maintenance personnel to repair If you want to do the cleaning, please turn off the unit and unplug the power cable from the outlet first • Set the volume properly to prevent injury to the unit and your personal health Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable iterial resources. To return your used device, please use the collection systems or contact the retailer where the product was They can take this product for environmental safe recycling. ittery (battery or batteries or battery pack) shall not be exposed to ive heat such as sunshine, fire or the like. Lighted flame sources, such as lighted candles, should be placed on the tus. DN: Danger of explosion if battery is incorrectly replaced. Replace th the same or equivalent type. iC ID STATEMENT - English:" This device complies with Industry Canada licence-exempt F standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device." This equipment should be installed and operated with a minur distance of 20 cm between the radiator and your body.