Marque 2
M165
User Guide

This manual was converted into an accessible format by A T Guys. While we strive to present an accurate version of the manual, errors may occur. Please visit http://www.atguys.com for the latest product information.

Contents
What's in the Box 3
Headset Overview 4
Pairing 5
Pair First Time 5
Pair Another Phone 5
Charge 6
Fit 7
Adjust the Fit 7
The Basics 8
Make/Take/End Calls 8
Mute 8
Adjust the Volume 8
Stream Audio 8
More Features 9
Save Power 9
Decipher the Lights 9
Hear it Whisper 9
Disable Voice Commands 9
Technical Specifications 10

What's in the Box

Headset AC charger
Eartips Earloop

Physical Description

Place the headset flat so that the large round button is on the top and the power switch is on the left side.

On the top, you will find a slightly recessed round button. This is the talk button, used to make, answer, and end calls.

On the left side is the power switch. The headset is on when the switch is away from you and off when it is toward you.

On the right side near the top is the volume/mute button.

On the side facing away from you is the small rectangular Micro USB port. This is used for charging your headset.

On the underside of the unit is the ear loop.

Headset Overview

Power button
Call button
Charge port
Headset LED (indicator light)
Volume/Mute
 button
/
Pairing

Pair First Time The first time you power on your headset, it begins the pairing process.
1 Put the headset on and turn it on.
•
iPhone and Android™
Smartphones Follow the voice-guided pairing instructions.
•
Other phones Use your phone's menu to:
2 While the headset is in pairing mode, activate Bluetooth®
on your phone and set it
to search for new devices.
3 Select “PLT_M165.”
4 If your phone asks, enter four zeros (0000) for the passcode or accept the connection.
The
indicator light
stops flashing red and white once successfully paired.

Pair Another Phone Multipoint technology lets you pair a second phone and answer
calls from either phone.
1 Power on your headset.
2
Press and hold the Call button
until the indicator light
flashes red and white or you hear
“pairing.”
3
While the indicator light
flashes red and white, activate Bluetooth on your phone and set it
to search for new devices.
4 Select “PLT_M165.”
5
If your phone asks, enter four zeros (0000) for the passcode or accept the connection.
The
indicator light
stops flashing red and white once successfully paired.

Charge

Your new headset has enough power to pair and make a few calls. It takes two hours
to fully
charge the headset; the indicator light turns off once charging is complete.
Fit
Adjust the Fit The universal-fit eartip has a thin loop that bends to gently tuck
into the contours of either ear.
1 Rotate the eartip on the headset or add the optional clip-on earloop to adjust
the fit.
2 Replace the gel eartip with one of the two alternate sizes, if it feels loose or
tight in your ear.

The Basics

Make/Take/End Calls
Mute
Adjust the Volume
Stream Audio
Answer a call
Choose:
•
Say “answer” after call is announced, or
•
Tap the Call button
Answer a second call
First, tap the Call button
to end current call, then tap the Call button
again to answer new
call.
End a call
Tap the Call button
to end current call.
Reject a call
Choose:
•
Say “ignore” after call is announced, or
•
Press Call button
for 2 seconds
Call back last call
To dial your last number you dialed, double-tap the Call button
.
Voice dial (phone feature)
Press the Call button
for 2 seconds, wait for phone prompt and then tell the phone to dial the
name of a stored contact.
You can mute the microphone during a conversation.
During a call, tap the Volume/Mute
/
until you hear “mute on” or “mute off.” While the
microphone is muted, an alert repeats every 15 minutes
.
Tap the Volume/Mute
/
button to cycle through preset levels.
Streaming audio is controlled using your phone, but when a call rings, the audio
automatically
pauses to allow you to answer or ignore the call. Once the call is ignored or ends,
the streaming audio is resumed.

More Features

Save Power

If you leave your headset powered on but out of range of your paired phone for more
than 90 minutes, your headset will conserve its battery power by entering into a DeepSleep
™ mode.
Once back in range with your phone, tap the Call button to exit DeepSleep mode. If
your phone is also ringing, tap the Call button again to answer your call.

Decipher the Lights

Your headset has an indicator light that flashes in response to a change in status
or after a button press.
Some examples of what you will see are:
• Solid red until charging complete and then off
• Flashing red and white during pairing
• Triple red flash when less than 10 minutes of talk time
• Triple white flash at incoming call
Hear it Whisper
Your headset tells you about status changes in English. For example:
“Power on”
“Pairing successful”
“Talk time (x) hours”
“Mute on”
“Lost connection”
“Recharge headset”

Disable Voice Commands

This headset only speaks and understands English. If you prefer to use the Call button
to answer
or reject calls, you can disable the voice commands “answer” or “ignore.”
With the headset powered on, simultaneously press the Call and Volume buttons until
you
see the indicator light flash white two times. Repeat these steps to reactivate the
commands.

Technical Specifications

Talk time: Up to 7 hours*
Standby time: Up to 11 days*
Headset weight: 7 grams

DeepSleep technology
• Activates when paired headset is out of range for over
90 minutes
• Provides up to 180 days* of battery readiness
Multipoint technology
Use one headset to answer calls from either of two
paired Bluetooth phones
Charge connector
Micro USB charging
Battery type
Rechargeable, non-replaceable lithium-ion polymer
Charge time (maximum)
90 minutes for full charge
Headset battery meter
On-screen for iPhone, enabled by Find MyHeadset
™
Bluetooth version
v3.0
Bluetooth profiles
Advanced Audio Distribution Profile (A2DP), Wideband
Hands Free (HFP) Profile 1.6 and Headset (HSP) Profile
1.2
Operating and storage temperature
32°F – 104°F (0 – 40°C)
NOTE * Performance is dependent upon battery and may vary by device.
NEED MORE HELP?
www.plantronics.com/support
Plantronics, Inc.
Plantronics BV
345 Encinal Street
South Point Building C
Santa Cruz, CA 95060
Scorpius 140
United States
2132 LR Hoofddorp, Netherlands
© 2012 Plantronics, Inc. All Rights Reserved. Bluetooth is a registered trademark
of Bluetooth SIG, Inc. and any use by Plantronics is under license. All
other trademarks are the property of their respective owners.
Patents US 5,712,453; Patents Pending
89142-06 (09.12)